Contact us

Live Chat with Tek representatives. Available 9:30 AM - 5:30 PM IST

Call

Call us at 1-800-833-9200

Available 9:30 AM – 5:30 PM (IST) Business Days

Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

USB4™ Transmitter, Compliance, and Debug Solution

Opt. USB4 Application Datasheet

Read Online:

The Tektronix USB41 Compliance and Debug solutions provide an easy way to validate and characterize the emerging USB4™ Router-Host, USB4™ Router-Device, and USB4™ Hubs as per the USB4™ Electrical Compliance Test Specification v1.0. Tektronix DPO/MSO70000SX/DX series (scope BW ≥ 21GHz) supports the Tektronix USB4 Compliance and Debug solutions.

USB4 Solution EN US 61W 73751 0
Tektronix USB4 Transmitter Compliance Solution

Key features

  • Tektronix USB4 Compliance and Debug solution provide a comprehensive toolset for the USB4™ Gen2 (10 Gbps) and Gen3 (20 Gbps) verification, characterization, debug, and compliance testing.
  • Tektronix USB4 solution is compliant with the USB4™ Specification Ver1.0 and USB4™ Router Assembly Electrical Compliance Test Specification Rev 1.0.
  • Tektronix DPOJET-USB4 Plug-in solution with setup files and MOI assists the root cause analysis.
  • Tektronix USB4 solution supports the Wilder Technologies USB4 Controller and USB4 Electrical Test Tool (ETT).
  • Tektronix Serial Data Link Analysis (SDLA) tool supports the De-embedding, Embedding, Equalization (CTLE+DFE), and Custom Channel Characterization.
  • The TekExpress USB4 Signal Validation feature validates the compliance pattern to ensure the accuracy of the results.
  • The TekExpress USB4 Pre-Recorded Mode supports the offline analysis and baseline for future specification changes.
  • The TekExpress USB4 Automatic DUT Control mode captures all the compliance test patterns. So the USB4 Transmitter testing completes without user intervention.
  • Tektronix USB4 Automatic DUT Control supports both USB4 Discrete and Integrated (SoC) products.
  • Complete both Lane 0 and Lane 1 Transmitter test without flipping the USB Type-C® connector or USB4 High-Speed fixture.
  • Quickly validate test results with comprehensive reporting that details test margins, pass/fail results, and plots in PDF, MHT, and CSV formats.
USB4 Solution EN US 61W 73751 0
Tektronix USB4 debug solution

Applications

USB transmitter testing

  • USB4 Silicon Testing: Host, Device, and Hub
  • USB4 Peripheral Testing: Host, Device, and Hub
  • Manufacturing testing

USB4 Solution EN US 61W 73751 0
Tektronix USB4 Transmitter connection diagram

Required test procedures (MOI) can be found at: http://www.tek.com/usb

USB4 Solution EN US 61W 73751 0
USB4 Gen3 (20 Gbps) TP2 Eye diagram

USB4 Solution EN US 61W 73751 0
USB4 Gen3 (20 Gbps) TP3 Eye diagram with Equalization (CTLE and DFE)

USB4 Solution EN US 61W 73751 0
Tektronix USB4 Tansmitter Compliance Report in MHT format

1USB Type-C® , and USB4™ are trademarks of the Universal Serial Bus Implementers Forum (USB-IF)

Ordering information

TekExpress USB 4 Transmitter Compliance and Debug Solution

DPO/MSO70000SX/DX2
Tektronix DPO (Digital Phosphor Oscilloscope) or MSO (Mixed Signal Oscilloscope) Oscilloscopes – 23 GHz and above with DPOJET (DJA) and SDLA64 installed
DPO/MSO70000SX/DX Opt. USB43
TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64)
DPO-UP USB43
TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA)
DPOFL-USB43
TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64); Floating
DPOFT-USB43
TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64); Floating Trial

Recommended USB4 Controller, High-Speed test fixture, and accessories

Item Vendor Quantity
USB4 Controller and High-Speed Test Fixtures: 640-0961-000Wilder Technologies 1
SMP(F) to 2.92mm(F) Adapter: SM8852Fairview MicrowaveMin 4
[Optional] SMP Terminators: ST2643Fairview Microwave 4
PMCABLE1M Phase Matched SMA cable set Tektronix 2

Oscilloscope and software prerequisite requirements

Operating System
DPO/MSO70000SX/DX with Microsoft Windows 10 OS
DUT Control Tool
The USB4 Electrical Test Tool (ETT) v 0.9.5 (or above) should be available on the oscilloscope. The USB4 ETT is available on the USB-IF Test Tools site http://www.usb.org/document-library/usb4ett)).
Controller Driver and Software
Wilder Technologies USB4 Controller Driver and Software should be available on the oscilloscope. Contact Wilder Technologies for software support.

2Required items: Opt DJA and Opt SDLA64. Optional items: Opt 10XL and DPO7AFP.

3Requires Opt. CIO, DJA, and SDLA64, and ≥ 21 GHz oscilloscope.