Download
Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

High Voltage Single Ended Probes

A high voltage single-ended probe is typically used for measuring ground referenced signals up to 40 kV. However, some single-ended probes are designed for instruments with isolated or floating inputs for measurements that are not ground referenced. Users should select probes with a low input capacitance specification (< 4 pF) to minimize the probe’s loading effect on the circuit because a probe with lower input capacitance will offer higher input impedance at higher frequencies.

Tektronix High Voltage Probe solutions offer:

  • Best-in-class bandwidth up to 800 MHz
  • Best-in-class probe loading with input capacitance as low as 1.8 pF
  • The only products with 3rd Party Safety Certification (UL, CSA, ETL)
  • Most extensive set of probe accessories

See more probes »

Base Price
US $328 - US $2,660
Buy/Quote Questions? Chat Now
High Voltage Single Ended Probes
Model Bandwidth Input Impedance Maximum Voltage List Price
P5122 200 MHz

100 MΩ || 4 pF

RMS: 1000 V CAT II

US $328
Configure & Quote
P5100A 500 MHz

40 MΩ || 2.5 pF

Peak: 2.5 kV
RMS: 1000 V CAT II

US $556
Configure & Quote
P5150 500 MHz

40 MΩ || 3.8 pF

Peak: 2.5 kV
RMS: 1000 V CAT II

US $588
Configure & Quote
TPP0850 800 MHz

40 MΩ || 1.8 pF

Peak: 2.5 kV
RMS: 1000 V CAT II

US $937
Configure & Quote
P6015A 75 MHz

100 MΩ || 3 pF

20 kV US $2,660
Configure & Quote
Passive High Voltage Probes

Literature Number: 56W-10262-13
Datasheet
Probes and Accessories
Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.


Part Number: 071238400
Declassification Manual
Tektronix Supplemental, 071329404
Product Information Sheet for People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Part Number: 071329404
User Manual
Tektronix Supplemental, 071296605
Product Information Sheet for People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Part Number: 071296605
User Manual
Tektronix Supplemental, 071329304
Product Information Sheet for People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Part Number: 071329304
User Manual
P5122
200 MHz 100X High Voltage Probe Instructions

This manual covers the operation of the probe and the standard accessories.
Part Number: 071272003
User Manual
P5100A
500 MHz 100X High Voltage Probe Instructions

This manual describes the use of the probe and accessories.
Part Number: 071288203
Primary User Manual
P5100A & P5150
500 MHz High Voltage Probes Technical Reference

This manual describes the procedures to verify the warranted specifications of the P5100A probe and to make internal adjustments to both probes.
Part Number: 077053002
Service Manual
TPP0850
800 MHz 50X High Voltage Probe Instructions

This manual describes the use of the probe and accessories.
Part Number: 071288402
Primary User Manual
P5150
500 MHz 50X High Voltage Probe Instructions

This document describes how to use the probe and accessories.
Part Number: 071288501
Primary User Manual
TPH1000
Probe Holder Instructions

This document provides instructions for using the probe holder to easily probe circuits and test points for hands-free operation.
Part Number: 071289400
Primary User Manual
TPP0850 Probe
Describes the use of the probe and accessories Instructions

This manual describes the use of the probe and accessories.
Part Number: 071288400
User Manual
P5100A
Describes the use of the probe and accessories Instructions

This manual describes the use of the probe and accessories.
Part Number: 071288200
User Manual
Voltage Probe Standard Compliance Update
The following probes do not comply with changes resulting from Amendment 1 (2008) to the IEC / EN 61010-031:2002 Standard and are not intended to be sold or placed on the market in the European Union after March 1, 2011. Read This First

Compliance Update
Part Number: 061436800
User Manual
P5122
200 MHz 100X High Voltage Probe Instructions

This manual covers the operation of the probe and the standard accessories.
Part Number: 071272001
Primary User Manual
Probe Safety Information
Prevent unsafe practices - always use these probes with ground-referenced oscilloscopes. Read This First

Prevent unsafe practices - always use these probes with ground-referenced oscilloscopes.
Part Number: 071268200
User Manual
P6015A
1000X High Voltage Probe Instruction Manual

This document contains information that supports basic instrument operation as well as how to service to the module level.
Part Number: 070822305
Primary User Manual
P5120 200 MHz Passive High-Voltage Probe
200 MHz Passive High-Voltage Probe Instructions

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Part Number: 071146300
Primary User Manual
ABCs of Probes Primer
Precision Measurements Start at the Probe Tip Probes are vital to oscilloscope measurements. To understand how vital, disconnect the probes from an oscilloscope and try to make a measurement. It can’t be done. There has to be some kind of …

Literature Number: 60Z-6053-14
Primer Marketing Document
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …

Literature Number: 60W_14232_10
Product Selector Guide Marketing Document
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
Faq Id58571 Faq
I have the P6015A probe without option 1R+ Probe Readout. Now I have a scope that will apply the 1000X attenuation factor automatically if the probe had that feature. Can it be added?
Yes, the BNC connector on the probe compensation box can be unsoldered, unscrewed, and replaced with the Tektronix part number 131-5320-00. All probe coding logic is contained in the new connector.
Faq Id61886 Faq
I have a probe that is no longer being manufactured. What is the replacement?
Please use our "Interactive Probe Selection Tool" to assist in locating a replacement probe for your Tektronix instrument.  The interactive tool is located at /node/3661.  If your instrument is not located in the upper instrument list, you can click …
Faq Id52846 Faq
How can I connect the P6015A High Voltage Probe to oscilloscopes with a 50 Ohm input such as the TDS6000+ TDS7000 and CSA7000 series?
The TCA-1MEG is designed to provide a 1 megohm input to Tektronix oscilloscopes with the TekConnect interface. Bandwidth and input voltage range are well within the the parameters needed for the P6015A. For more information on the TCA-1MEG click …
Faq Id61751 Faq