Can the WFM4000/5000 waveform monitor be mounted into an older 1700 Series rack mount case?
No - the older 1700 rack mount is not suitable for the new WFM4000 and WFM5000 waveform monitors. A newer rack mount configuration is required. Your choices are...
WFM50F02 - A dual side-by-side configuration for two WFM4000/5000
WFM50F03 - A dual side-by-side configuration for one WFM4000/5000 and one WFM6000 series, one WFM7000 series or one AMM768.
For those installations that are currently using a WFM6xxx or WFM7xxx, in the rack mount that was built for that series of products (ordered originally as WFM7F05), it is also possible to "back fit" your new WFM4000/5000 into this existing rack mount situation. To do this, you will need to...
- Order part number 437-0523-00, a new short depth adapter sleeve.
- Remove the existing unused sleeve from the rack cabinet where the WFM is going to be installed, and install the new short depth sleeve in its place.
This FAQ Applies to:
No product series
FAQ ID 60526View all FAQs »