How to configure the Model 2281S-20-6 as just a power supply?

Model 2281S-320-6 has three functions (high precision power supply, battery test and battery simulator)

To configure as a power supply from the front panel for 3.8V at up to 4A:

Select Power Supply from the main menu. Press ENTER

Select Vset. Use the up/down and right/left arrow buttons to enter in 3.8V. OR use the data keypad to enter 3.8V. and press ENTER.

Select I-Limit. Use the up/down and right/left arrow buttons to enter 4A, Or use the data keypad to enter4A. and press ENTER.

Press OUTPUT, and 3.8V should appear at the output terminals and the display.

This FAQ Applies to:

Product:

FAQ ID 251146