Can you use NI Signal Express Tektronix Edition to connect an oscilloscope with an IVI-C driver?
You can connect to the TDS3000 Series Oscilloscopes using IVI Instrument Steps in SigExpTE (National Instruments Signal Express Tektronix Edition) software.
Required software is SigExpTE (National Instruments Signal Express Tektronix Edition) and the TDS3000 IVI driver available from National Instruments Instrument Driver Network
Use the 10 step process documented in National Instruments Signal Express application note to setup and acquire waveforms.
This FAQ Applies to:
No product series
FAQ ID 63341View all FAQs »