I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?

Question:

I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?

Answer:

The Test Connection button pings the Gateway. If the Gateway IP Address is not specified, or specified incorrectly, the Test Connection will fail. This applies whether you are using a crossover cable or a "real" Ethernet connection. The selection is not required to communicate with the scope, it is strictly that the Test Connection button, which pings the gateway, will work.

This FAQ Applies to:

Product Series: TDS3000, TDS3000, TDS3000, TDS3000, TDS3000, TDS3000

Product: TDS3014B, TDS3032B, TDS3034B, TDS3052B, TDS3054B, TDS3012, TDS3014, TDS3032, TDS3034, TDS3052, TDS3054, TDS3012B, TDS3024B, TDS3044B, TDS3064B, TDS3012C, TDS3014C, TDS3032C, TDS3034C, TDS3052C, TDS3054C

FAQ ID : 55806

View all FAQs »
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top