Contact us
Call
Call us at
Available 9 AM - 5 PM IST Business Days
Download
Download Manuals, Datasheets, Software and more:
Feedback
PSPL5882 40 Gb/s Broadband Amplifier Datasheet
PSPL5882 Datasheet
The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.
PSPL5882 Datasheet
The PSPL5882 is extremely broadband, covering over 6 decades from 25 kHz to 35 GHz. It also demonstrates a very clean time domain response, resulting in high quality 40 Gb/s eye diagrams. The PSPL5882 includes internal reverse voltage protection, power supply regulation, and sequencing circuitry, making it insensitive to power supply voltage variation and application sequence.
Key performance specifications
- Electro-Absorption Modulator driver or optical receiver amplifier
- Linear amplifier with 16 dB gain
- 25 kHz to 35 GHz bandwidth
- 2.7 Vamp eye amplitude
- 9 ps rise time
Typical 40 Gb/s eye measurements
Input from Tektronix PPG4001, PRBS = 231–1, 525 mV
Output amplitude, 3 V
Typical performance
S11, 5 dB/div, 5 GHz/div
S12, 10 dB/div, 5 GHz/div
S21, 1 dB/div, 5 GHz/div
S22, 5 dB/div, 5 GHz/div
Typical S21, S11, and S22 from 10 kHz to 50 GHz
Typical Group Delay (10 ps/div, 5 GHz/div, 0.8 GHz aperture)
Typical Step Response (input signal is 16 ps fall time)
Specifications
| Parameter | Symbol | Units | Minimum | Typical | Maximum | Comments |
|---|---|---|---|---|---|---|
| Impedance | Z | ohms | 50 | |||
| Upper 3 dB freq. | fc,h | GHz | 30 | 35 | Relative to gain at 100 MHz | |
| Lower 3 dB freq. | fc,l | kHz | 25 | 40 | ||
| Small Signal Gain | S21 | dB | 14.5 | 16 | Measured at 100 MHz | |
| Gain Ripple | dB | ±1 | ±2 | 50 MHz | ||
| Max Power Out (-1 dB gain comp) |
P1 dB | dBm | 12 11 |
f 25 GHz ≤ f | ||
| Output Eye Voltage | VOUT | Vamp | 2.4 | 2.7 | Vin = 0.6 Vamp, 12.5 Gb/s PRBS | |
| Input Return Loss | S11 | dB | -18 -10 |
-14 -8 |
50 MHz 10 GHz ≤ f | |
| Output Return Loss | S22 | dB | -13 -10 |
-10 -8 |
50 MHz 10 GHz ≤ f | |
| Rise Time | tr | ps | 9 | 10-90%, root-sum-of-squares extraction, 16 ps system rise time | ||
| Fall Time | tf | ps | 9 | |||
| Overshoot | % | 7 | 1 ns window, 16 ps system rise time | |||
| Undershoot | % | 7 | ||||
| Noise Figure | NF | dB | 6 | Measured at 1.5 GHz | ||
| Group Delay Variation | ps | ±20 | ±30 | 3 GHz 0.8 GHz aperture | ||
| Polarity | Non-Inverting | |||||
| Coupling | AC, input and output | |||||
| DC Connector | Solder pins | |||||
| Voltage Supply (+) | +VDC | VDC | 7 | 8 | 9 | |
| Voltage Supply (-) | -VDC | VDC | -5.5 | -5 | -4.5 | |
| Supply Current (+) | +IDC | mA | 155 | |||
| Supply Current (-) | -IDC | mA | 10 | |||
| Max Allowed Input | dBm | 16 | Input damage threshold | |||
| DC Voltage applied to RF Input or Output | VDC | -4 | 8 | Damage threshold | ||
| Operating Temp | TCASE | °C | 0 | 70 | Case temperature | |
| RF Connectors | 2.92 mm or 2.4 mm jacks (f) | |||||
| Warranty | One year | |||||
Mechanical dimensions
Ordering information
Models
- PSPL5882
- AMPLIFIER, 40-45 GHz, 16 dB GAIN
Options
- Opt. 240JJ
- Female 2.4 mm connectors on Input and Output
- Opt. 292JJ
- Female 2.92 mm connectors on Input and Output
